The monitoring question and reporting unit
This implementation guide considers STAC Data Provenance in the context of Seasonally dry forests, with HLS L30 and S30 harmonized reflectance as the selected data source. The purpose is to design a defensible monitoring workflow before purchasing imagery, selecting software settings or committing to an operational alert. Treat the proposed combination as a starting point for a feasibility assessment: the landscape may contain features that the product cannot resolve, and the relevant physical variable may differ from the decision a manager wants to make. Establish that relationship explicitly, then document what additional observations are required.
Landscape context and independent observations
Dry-forest monitoring must separate expected leaf shedding from persistent canopy disturbance. The relevant decision might concern clearing, post-fire recovery or unusual seasonal behavior. Define a forest and disturbance concept suited to the landscape, because sparse woody cover, shrubs and grass can coexist within the same satellite observation unit. Define the reporting unit, the observed variable and the action a finding could trigger before selecting an indicator. Retain these definitions so evaluation addresses the management question rather than visual appearance.
Rain onset and duration strongly affect leaf emergence and understory growth, while exposed soil becomes prominent during the dry season. Interannual rainfall variation can shift the apparent seasonal baseline. Compare similar phenological periods and retain rainfall context, instead of treating a greener wet year as evidence of permanent woody recovery. Record the observation window and comparison population. Consistent processing cannot compensate for dates or spatial units representing different processes. Preserve acquisition and context information so another analyst can reconstruct the comparison.
Grass flushes may create rapid greenness recovery after fire while woody structure remains damaged. Conversely, normal deciduous behavior can appear as extensive loss when dates are poorly matched. Bare ground, smoke and shadows can further confuse interpretation, so temporal persistence and independent evidence are essential before assigning a disturbance category. Treat competing explanations as hypotheses to test, with insufficient evidence retained as a legitimate result. Avoid forcing every difference into a problem class. Identify the additional observation that would change the interpretation.
Use reference sites covering woody cover, herbaceous cover and seasonal leaf states, with repeat observations where feasible. Deliver disturbance intervals and recovery indicators as separate layers. Explain whether each indicator tracks greenness, cover or structure, and avoid converting a seasonal spectral signal into biomass or biodiversity claims without suitable validation. Document reference selection and independence from threshold or model tuning. Preserve usable coverage and rejected observations. State the conclusion's spatial and temporal support so later updates remain comparable without overstating measured evidence.
Select the measurement and data product
Harmonized Landsat and Sentinel-2 products bring observations onto a common 30-metre grid with processing intended to improve comparability between the contributing sensors. The historical L30 and S30 surface-reflectance families were available before March 2024. This profile excludes later vegetation-index additions and Sentinel-2C contributions. Harmonization supports denser land-surface time series, but it does not make every band or acquisition perfectly equivalent in every environment.
Use the product's quality information, scaling and band definitions, and retain the source sensor and acquisition date for each observation. Evaluate residual differences when combining L30 and S30 into one trajectory. A common grid simplifies spatial comparison but does not remove cloud, shadow, view-angle or mixed-pixel effects. Keep valid-observation counts and describe the compositing rule when producing a weekly or monthly monitoring layer.
More acquisition opportunities can improve the chance of observing a change, but usable frequency remains dependent on local conditions. Validate anomalies against source reflectance and independent observations rather than interpreting every sensor-to-sensor step as environmental change. For narrow features or very small fields, the 30-metre support remains a limitation. Assess whether the combined record improves the intended decision using a consistent evaluation period and reference evidence.
Prepare and test the analysis
Provide enough catalog information to identify what the raster represents, when it was observed and how its assets can be accessed. A download link alone does not describe analytical provenance. Define the decision unit, observation period and consequence of an incorrect result before choosing processing settings. Separate the physical measurement from the management interpretation. The workflow should explain when available imagery is adequate, when more observations are needed, and who is responsible for reviewing uncertain cases.
Assign stable item and asset identifiers, record geometry and temporal support, and link the processing description. Distinguish acquisition time from production time, especially for composites spanning multiple observations. Keep a small representative test area and retain the original inputs. Record the product identifier, processing level, coordinate reference system and every setting that changes the numbers. Change one assumption at a time so that a reviewer can distinguish a processing effect from a real difference on the ground.
For a hypothetical monthly composite using 12 acquisitions, one publication timestamp cannot describe all observation times. Record the start and end of the represented interval and retain the input identifiers. This is an illustrative calculation for checking the logic, not a measured outcome or a universal threshold. Repeat it on known inputs before processing the full region. Then vary the relevant assumption and document whether the decision changes, including cases where the available evidence cannot support a confident answer.
A syntactically valid catalog can still contain broken links, incorrect footprints or misleading timestamps. Copying metadata from another layer without checking its content undermines reproducibility and can send automated clients to incompatible assets. A plausible color pattern alone cannot resolve these competing explanations. Review representative failures alongside apparently successful locations, and compare observations made under similar conditions. Preserve a separate uncertainty or exclusion layer so that unsupported areas cannot quietly enter summaries as if they had the same evidential strength as reliable observations.
Validate the catalog against its selected specification and test each asset link. Compare metadata with the real raster footprint, units, mask and temporal support before accepting it for discovery or automation. Set the acceptance rule before examining the final map. Use independent evidence that represents the difficult conditions as well as the easy ones. Report how many observations passed, which failed and why. A threshold that works in this test area still needs checking before transfer to another landscape or season.
Deliver the catalog, asset checksums, source identifiers and processing-version links together. Preserve stable provenance when data move and explain which identifiers change when an analytical product is regenerated. Package the analytical layer with its quality information and a short reproduction note. Include the acquisition dates, processing assumptions, limitations and responsible reviewer. Preserve stable identifiers across maps and tables so another analyst can trace a reported number back to its inputs and repeat the comparison without guessing the settings.
Interpret the combined evidence
Read the landscape and product sections together before applying the analysis procedure. In this guide, Seasonally dry forests defines the reporting context, while HLS L30 and S30 harmonized reflectance defines the available measurement; STAC Data Provenance supplies the processing and review question. These roles are deliberately separate. A working data connection does not establish that the measurement answers the management question. Reject a combination when the target is smaller than the effective observation scale, when the required season has no usable observations, or when the relevant property is not measured by the sensor. Retain that rejection in the project record so that an attractive demonstration does not become an unsupported operational promise.
Acceptance checks before delivery
Write acceptance conditions before inspecting the final map. Specify the reporting boundary, observation period, minimum valid coverage, reference sampling design and the consequence of an incorrect alert. Use project-specific values agreed with the recipient rather than copying a threshold from an unrelated landscape. Keep a small set of independent observations outside all parameter selection. Review omission and commission errors separately and examine boundary areas, rare conditions and missing dates. If the available reference observations do not cover the intended operating conditions, narrow the stated scope of the result instead of claiming that an apparently successful demonstration proves general reliability.
A useful GIS delivery contains more than a colored image. Export the analytical values where licensing permits, the validity mask, reporting geometries with stable identifiers, and a concise record of product names, acquisition dates, processing versions, coordinate reference system and resampling choices. Distinguish valid zero values from missing observations. Provide the area or count of usable measurements for every reporting unit and explain which units were excluded. A colleague should be able to trace a suspicious statistic back to the underlying observation without reconstructing the entire project from screenshots. Store the interpretation and its limits beside the data, not only in a presentation.
Connect the result with an ITSensing workflow
Use the ITSensing satellite catalog and remote sensing tools to evaluate the parts of this workflow that are available for the selected account and data source. Begin with a small representative area and compare the output with a trusted reference before scaling up. The product links below lead to the catalog, tools, documentation and plans so the team can check data access and processing requirements directly. This guide describes an analytical procedure; it does not assert that every named product, algorithm or export format is supplied natively by ITSensing. Where a step uses an external GIS or specialist tool, keep its inputs and outputs in the same reproducibility record.
